• Starboard Choice Marine
  • Moore Boats
D&R Sports Center

Tournament News Powered By Lake Drive MarineTournament News Powered By Lake Drive Marine


Mercury Marine Report

How to Properly Care and Clean Your Vinyl Boat SeatsHow to Properly Care and Clean Your Vinyl Boat Seats

A boat’s vinyl seats might look and feel spectacular when the boat is brand new, but they can quickly deteriorate as sun, salt spray, stains, mold and mildew take their toll. Preventive maintenance is the key to keeping your cushions looking great and feeling supple because once mildew or sun damage gets a foothold, it’s difficult, if not impossible, to bring vinyl back to its original glory.

Here’s the good news: Caring for vinyl is simple, and it all boils down to keeping your seat cushions clean and protected from the sun.

Cleaning Boat Vinyl

It’s important to take special care when cleaning modern marine vinyl, which comes from the factory already treated with antimicrobial additives. These do a better job than any aftermarket product at protecting the fabric against mold and mildew, so you don’t want to inadvertently scrub them away with harsh chemical cleaners or a stiff scrub brush. The best practice is to wash down vinyl with gentle soapy water and a soft rag every time you use the boat. If you skip this step, small contaminants will work their way into the vinyl’s surface over time, providing mold and mildew a foothold to begin growing.


Mercury Report

Get Hitched Properly When Towing A BoatGet Hitched Properly When Towing A Boat

Before you get on the water, you must get to the water.

Unless you store your boat at the marina, you’ll need a suitable tow vehicle. Just don’t overlook the hitch. Many people – especially those who have never towed before – assume that a hitch is a hitch and that as long as your vehicle has one, you’re ready to hook up and hit the road. The fact is, hitches can vary widely in terms of weight capacity and application, and all are most certainly not created equal.

To properly and safely tow a boat, you need to ensure that your tow vehicle – be it a truck, SUV or van – is equipped with a suitable receiver-type hitch that is rated to handle both the tongue weight (TW) and gross trailer weight (GTW) of your fully-loaded boat-and-trailer combo. Every hitch is designated with a class rating, from Class I to Class V, and your hitch’s classification, as well as the combined weight of your fully-loaded boat and trailer, are very important things to know.

Hitch Classifications

A Class I hitch is rated for up to 2,000 pounds GTW and 200 pounds TW, so it’s suitable for smaller boats. A Class II hitch has a higher capacity at 3,500 pounds GTW and 300 pounds TW, which is big enough for a small aluminum or inflatable boat. For reference, a trailer loaded with an 18-foot outboard-powered runabout will tip the scale at about 3,000 pounds before you’ve put an ounce of gear or drop of fuel in it. Minivans and smaller SUVs often come equipped with a Class I or Class II hitch.

A Class III hitch is one of the most common hitches, and with its 6,000-pound GTW and 600-pound TW capacity, it’s capable of safely handling the vast majority of trailerable boats on the market. This hitch is best suited for a full-size truck or SUV, and it bolts directly to the frame for a robust and secure connection. The receiver of a Class III hitch typically accepts a 2-inch square insert – also called a drawbar or ball mount – which supports the tow ball and connects the trailer to the hitch.

Class IV and V hitches are also available, but they’re only necessary for very large and heavy boats. Class III, IV and V hitches can also be fitted with weight-distribution systems that can significantly increase the working capacity of the hitch and offer better stability on the road. Weight-distribution systems typically require a special drawbar and adding auxiliary connection points to the trailer. If your boat is heavy enough to require a Class IV or V hitch and/or a weight-distribution system, you’ll likely need a heavy-duty truck to pull it, so be extra mindful of your vehicle’s tow rating.

When buying a hitch, you’ll also need to buy a drawbar and tow ball that carry the same rating as your hitch. If either component is rated for less weight than the hitch, you’ve put a weak link in the chain and therefore reduced your towing capacity to the rating of the lowest-rated component.

A word of caution: The bumper of your tow vehicle might have a hole where a tow ball could be installed. Ignore it. An actual receiver hitch is the only suitable way to tow.


Mercury Report

Need A Propeller Change? Your Mercury Dealer May Offer Test DrivesNeed A Propeller Change? Your Mercury Dealer May Offer Test Drives

A stainless steel propeller can last many seasons, but for most boat owners the cost is not insignificant, especially for boats with more than one engine.

With this in mind, Mercury Marine has created a Propeller Demo Program for its dealers that allows a boat owner to test drive stainless steel Mercury propellers. The demo program makes it possible to zero in on the best all-around propeller model and pitch size for your boat before you make that purchase.

Mercury dealers participating in the Propeller Demo Program have on hand a selection of popular stainless steel propeller models in a range of pitch sizes dedicated to demo use. Each dealership devises its own demo program policy, but most request a modest deposit, which may often be applied to the purchase of a new prop. If you decide to make a purchase, the dealer will order you a brand-new prop. The demo props go back on the shelf for the next boater to try.


By BoatUS

Are You Running the Right Prop on Your Fishing Rig?Are You Running the Right Prop on Your Fishing Rig?

Any practical boat owner knows to change the engine oil, swap out the impeller every year or two, and change worn belts before they break. But the propeller is much more likely to be overlooked. Choosing the wrong prop or continuing to use a damaged prop can decrease boat performance, increase fuel consumption, and potentially damage your engine and transmission. Here are five conditions that warrant a closer look at your prop.

Tip

With the prop out of the water, tap each blade in turn with block of wood. A different tone may indicate a serious problem.

Is Your Boat Slow To Come Onto Plane?

If your prop has too much pitch (see "A Few Important Definitions" below) like the one above, the engine will have a lousy "hole-shot" — the ability to jump up on plane quickly — and will lug (or drag). It's like starting from a stoplight with your car in third gear — not only will it take much longer to accelerate, the engine has to work hard at low speeds, which places a tremendous load on the pistons, crankshaft, and bearings. This, in turn, can cause detonation, piston seizure, and other engine damage.