Z-man Report
Z-man Hella CrawZ™
While ElaZtech’s Z-man lure qualities produce livelier underwater movement and more fish per bait, they come with a learning curve, especially when rigging the baits.
Here is how some of the company’s pros rig theirs:
Light-Duty Weedless
“Because the material is so soft and flexible, it compresses easily,” explains MLF Pro David Walker. “This makes ElaZtech baits super effective when rigged on an exposed hook. Baits like the Finesse TRD™ or a MinnowZ™ on a jighead are great fish catchers—and fish-hookers. It’s because their free-flowing movements elicit strikes; and because the soft compressible material moves out of the way and allows the hook to penetrate.
“With Texas rigging, it’s a slightly different story,” he admits. “Keeping the hookpoint hidden in the soft material was the first challenge, but also a great exercise in learning how ElaZtech works.” Following countless trials with different hooks and rigging configurations, Walker, Feider and other pros landed on specific schemes that produce high-percentage hookset ratios.
For Walker, rigging routines for baits like the Hella CrawZ™, Turbo CrawZ™ or Palmetto BugZ depend on light versus heavy flipping situations. In light cover, Walker leans on the Palmetto BugZ, rigging it on a 4/0 wide gap EWG hook. “Slide the hookpoint into the bait’s head and back out about three-quarters of an inch down,” he explains. “Rotate the bait 180-degrees and pull the body slightly forward before planting the hook back into the bait’s belly, pushing the hookpoint just through the material. Then, slide just a ‘skin’ of ElaZtech back over the hookpoint for a light barrier of protection.
Traditional Texas Rigs
Walker’s second rigging method is reserved for punching or flipping a Palmetto BugZ or a Hella CrawZ in heavier cover. “I go back to the old school way we used to make a Texas rig,” he grins. “Using a regular straight shank worm hook (choose one with a keeper barb, such as a VMC Flippin Hook), push the hookpoint nearly through the material to create a channel. Then, back it off and bury it right into the middle of the bait. I really like this method because when a bass bites, the soft ElaZtech material compresses and slides out of the way, allowing the hookpoint to do its job.
Offering a similar perspective, Bassmaster Elite Series angler Seth Feider calls out his favorite punching system. “I’ve pretty much always got a Turbo CrawZ on the deck,” notes Feider. “It’s just a super versatile bait that I’ll pitch to targets—bushes, pencil reeds, laydowns, you name it.
“For Texas rigging—pitching or flipping— I’m slinging the Turbo CrawZ behind a ¼- or 3/8-ounce sinker, pegged in place. I tried a bunch of different rigging and hook options before landing on a plain, 3/0 straight-shank VMC worm hook. A traditional hook gives you that good 45-degree angle between hookpoint and the bait—not in-line or parallel like you get with an EWG hook. Just bury that straight-shank hook about halfway into the bait’s body. The ElaZtech material’s so soft that when a bass bites, the hookpoint pokes right through and into the jaw. Once I started rigging it this way, my hooking percentages went way up.”
More tricks
To elevate his own hookup ratios, Walker has contrived a few tricks. “First, avoid hooks with knife-like cutting edges, which slice excessively wide openings in the material. To preserve the bait’s integrity and snag resistance, pick a hook with a standard round or cone-cut point.”
If he’s punching heavy cover with braid, Walker ties his hook on with a snell knot. “Regardless of which snell knot version you chose, make sure you start by threading the line through the eye on the bend side of the hook. Done right, when the sinker contacts the inner jaw of a bass, it’ll pivot and drive the hook up into the jaw, right where you want it.”
Finally, says Walker, keeping the bait’s head pinned tightly to the hook eye prevents it from balling up over the hook gap when bass bite. “Make sure you’re using a hook with a nice sharp keeper barb—a chin-keeper. Holds ElaZtech nice and tight. But I go beyond this with a little fly-tying trick that forms a bulletproof bond between hook and bait.
“The trick is to wrap the hook-shank up and around the keeper barb with a layer of fly-tying thread. Secure it with a couple half-hitches or a whip-finish. The thread layer absorbs and holds drops of superglue, which bonds an ElaZtech bait almost permanently in place.